Pack sub solution comprenant :

-P1L-112 : caisson de basse :
Woofer Quantity: 1
Woofer Size: 30cm
Woofer Series: Punch Stage 1
Woofer Impedance (ea): 4-Ohm SVC
Power Handling: 150 Watts RMS / 300 Watts Max
System Configuration: Ported
Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
Speaker Connector: Up To 4 AWG Binding Post
Poids : 20.41 kg
Dimensions : 39.4cm x 48.9cm x 41.9cm

-P3001-1 : ampli mono :
Number of Channels: 1
Rated Power (continuous power): 150W x 1 @ 4-Ohms RMS / 300W x 1 @ 2-Ohms RMS
Total Power (total sum of 'rated power'): 300 Watts
Dynamic Power: 240 Watts x 1 @ 4-Ohms 0 degres Res
powercube measurement (info): 404 Watts x 1 @ 2-Ohms 0 degres Res
Bridgeable: No
Efficiency (average): 69per cent @ 4-Ohm / 65per cent @ 2-Ohm
Crossover Controls:
-High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
-Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Tone Controls:
-Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
-Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
-Function depends upon LP/AP/HP switch position
Signal Input: Low level: 1 RCA pair
Signal Output: n/a
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
Visual Indicators: Power, Thermal, Protect
Circuit Topology Class: Class A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Poids : 2.87 kg
Dimensions (HxLxL): 5.71 x 19.37 x 22.80cm

-RFK8X : kit d'installation complet :
-5,5m de cable alimentation 8AWG (8mm2)
-1m de cable masse 8AWG (8mm2)
-10m de cable haut-parleur 16 AWG (1.5mm2)
-6.5m d'une paire de cable RCA torsade
-porte fusible et fusible AGU
-6.5m de cable cable remote
-1 fusible de 40 amperes