Le P400-4 est parfait pour une solution 4 canaux avant et arriere ou 3 canaux avant avec subwoofers. Mettez simplement une paire de haut-parleurs a l'avant et des subwoofers a l'arriere et voila ! Vous avez le 'PUNCH'. Avec son design flexible, le P400-4 est un excellent choix d'amplificateur pour n'importe quel véhicule.

Poids : 4.03kg
Dimensions (HxLxL): 5.71 x 19.37 x 33.07cm

-12dB/octave crossover
-2/4 channel switch
-4 Gauge power/ground terminals
-Audiophile grade speaker connections
-MOSFET output stage
-MOSFET power supply
-Top Mounted LED Indicators

Specifications :

Number of Channels: 4
Rated Power (continuous power): 50W x 4 @ 4-Ohms RMS / 100W x 4 @ 2-Ohms RMS / 200W x 2 @ 4-Ohms bridged RMS
Total Power (total sum of 'rated power'): 400 Watts
Dynamic Power (powercube measurement): 86 Watts x 2 @ 4-Ohms 0degres Res FRONT / 85 Watts x 2 @ 4-Ohms 0degres Res REAR / 144 Watts x 2 @ 2-Ohms 0degres Res FRONT / 142 Watts x 2 @ 2-Ohms 0degres Res REAR
Bridgeable: Yes
Efficiency (average): 71per cent @ 4-Ohm / 70per cent @ 2-Ohm
Crossover Controls:
-Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
-Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
-Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
-Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Tone Controls:
-Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
-Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
-Function depends upon LP/AP/HP switch position
Signal Input: Low level: 2 RCA pair
Signal Output: n/a
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
Visual Indicators: Power, Thermal, Protect
Circuit Topology Class: Class A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB