Le T1004 offre une flexibilite enorme lorsqu'il connecte plusieurs haut-parleurs puisqu'il est concu pour fonctionner a basse impedance. Naturellement utilise pour alimenter les haut-parleurs eclates, vous pouvez aussi bridger les canaux arrieres pour ajouter un subwoofer 4 Ohms. Un condensateur est conseille.

Poids : 11.8 kg
Dimensions (H x L x L) : 6.6 x 32.5 x 58.4 cm

-1/0 Gauge power/ground connectors with ANL fusing
-12dB or 24dB/octave selectable crossover
-2/4 channel switch
-Audiophile grade speaker connections
-Best in class 4 oz. copper traces
-Infrasonic filter
-Stealth Connections

Specificites :

Number of Channels: 4
Rated Power (continuous power): 50W x 4 @ 4-Ohms RMS / 100W x 4 @ 2-Ohms RMS / 200W x 4 @ 1-Ohm RMS / 200W x 2 @ 4-Ohms bridged RMS / 400W x 2 @ 2-Ohms bridged RMS
Total Power (total sum of 'rated power'): 800 Watts
Bridgeable: Yes
Crossover Controls: High-Pass (HP): 40-4kHz 12db or 24db/Octave Linkwitz-Riley / ILow-Pass (LP): 40-4kHz 12db or 24db/Octave Linkwitz-Riley / 10x crossover switch / Infrasonic filter: 27Hz 12db/Octave
Tone Controls: Bass: 0dB to +18dB @ 35-70Hz
Signal Input: Low level: 2 RCA pair / Input switch: 2/4 ch.
Signal Output: Low level: 1 RCA pair / Preamp Output Crossover: HP/AP/LP 12db/Octave Butterworth
Power Input Connector: Block
Power Wire Gauge: 1/0 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Fan cooled
Remote Controls: ParaPunch Bass EQ (included with cable)
Visual Indicators: Power On / Thermal Status /Speaker Protection
Circuit Topology Class: Class A/B
Frequency Response: 20Hz to 20kHz +/- 0.5 dB