Le T20001bd est le plus optimise en utilisation avec des subwoofers - et des GROS subwoofers. Delivrant une puissance de 2000W et l'efficacite de la classe BD, il peut aisement alimenter meme les plus gourmands des subwoofers. Un gros condensateur et un alternateur a haut rendement sont recommandes.
Poids : 12.7 kg
Dimensions (H x L x L) : 6.6 x 32.5 x 58.4 cm
-0degres/180degres Phase Switch
-1/0 Gauge power/ground connectors with ANL fusing
-12dB or 24dB/octave selectable crossover
-Audiophile grade speaker connections
-Best in class 4 oz. copper traces
-Infrasonic filter
-MasterSync
-PowerSync
-Stealth Connections
Specificites :
Number of Channels: 1
Rated Power (continuous power): 750W x 1 @ 4-Ohms / 1500W x 1 @ 2-Ohms / 2000W x 1 @ 1-Ohm
Total Power (total sum of 'rated power'): 2000 Watts
Bridgeable: Yes (bd-sync2 cable required) / MasterSync / PowerSync
Crossover Controls: Low-Pass (LP): 32-250Hz 24db/octave Butterworth / Infrasonic filter: 27Hz 12db/octave
Tone Controls: Bass: 0dB to 18dB @ 35-70Hz / Phase: 0/180 degrees
Signal Input: Low level: 1 RCA pair
Signal Output: Low level: 1 RCA pair
Power Input Connector: Block
Power Wire Gauge: 1/0 AWG
Speaker Output Connector: Screw terminal barrier strip
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Fan cooled
Remote Controls: ParaPunch Bass EQ (included with cable)
Visual Indicators: Power On / Thermal Status /Speaker Protection
Circuit Topology Class: Class bd
Frequency Response: 20Hz to 300Hz +/- 0.5 dB
